1. The first step is to connect the water separator to the water inlet and outlet of the floor heating. After finding the water inlet and outlet of the floor heating, connect the pipes above the water separator to it.
2. The second step is to set two valves on the water separator after the connection is completed. This valve is mainly used to clean or replace the filter, and it will be more convenient to use.
3. In the third step, a bypass pipe needs to be set at the water inlet and outlet of the water separator, and a valve needs to be set above the bypass pipe, and the door is used to control the switch.
4. The fourth step is to set a drain valve on the top of the water separator. The drain valve is mainly used to drain water, and it can also play a role in deflating air, which can effectively prevent it from being blocked during operation.